Illustration by tuput
English
On 6 November 2026 Union Minister Ashwini Vaishnaw opened online applications under three pillars of Semicon 2.0, a Rs 1,27,500 crore programme. The same day the Ministry of Electronics and IT approved 12 more component projects with projected investment of Rs 7,503 crore, taking the scheme to 118 approvals.
On 6 November 2026 India’s chip programme moved into its second phase. Ashwini Vaishnaw, the Union minister for electronics and information technology, launched the Semicon 2.0 web application portal, and companies can now apply online for support under three of the programme’s six pillars: machines and materials, new fabs (chip-making plants) and packaging. The same day the Ministry of Electronics and Information Technology (MeitY) approved 12 more projects under the Electronics Components Manufacturing Scheme, with projected investment of Rs 7,503 crore, according to the Press Information Bureau (PIB), the government’s release service.
What opened on 6 November
Semicon 2.0 has a Cabinet-approved outlay of Rs 1,27,500 crore under the India Semiconductor Mission (ISM), the government body that runs the programme. The Cabinet cleared it on 15 July 2026. PIB lists six pillars: chip design, machines and materials, more fabs, further strengthening of the packaging industry, research and development, and talent development. The portal takes applications for pillars 2, 3 and 4. Applications for the other three are not on the portal yet.
Vaishnaw said the second phase will concentrate on equipment, materials, chemicals and gases, and set a target of bringing at least three major equipment makers and five chemicals and gases companies to India. PIB’s account of his remarks says he asked for rigorous selection of projects, guided by quality, technological depth, research and development, and global competitiveness.
The money and the rules were set earlier. According to Deccan Chronicle and FoneArena, MeitY notified the scheme on 31 August 2026 with six pillars and ten support categories. Both report support of 40 per cent of project cost for silicon fabs, 35 per cent for compound and display fabs, 35 per cent for advanced packaging and 25 per cent for conventional packaging. Those percentages come from news reports of the notification, and this article did not open the gazette text itself. The ISM site lists guidelines for the three open pillars dated 16 September 2026.
Where the first phase stands
The first phase, Semicon 1.0, approved 12 manufacturing projects across six states with cumulative investment above Rs 1.64 lakh crore, and PIB says five had started commercial production as of October 2026. PIB’s 17 September 2026 release names them: Micron, Kaynes and CG Semi, joined that day by CDIL Semiconductor in Mohali and Suchi Semicon in Surat. PIB calls all five assembly, testing, marking and packaging units. The full project list, the dates and the first fab are covered in our look at the semiconductor fab race; the Cabinet release of 15 July 2026 says the first fab is scheduled to be commissioned in 2028.
On the design side, PIB’s 6 November release reports that 105 startups have been given access to chip-design software (called EDA tools), 24 are funded and 15 have raised venture capital. Under the Chips to Startup programme, 332 institutions have the tools and about 70,000 students have been trained. A related homegrown design effort is the Shakti processor family from IIT Madras.
What ATMP and OSAT mean
A chip is first made on a wafer, a thin disc of silicon, in a fab. The later steps are assembly, testing, marking and packaging, shortened to ATMP. Packaging connects a chip to the circuit it will sit in and shields it from heat, light, dirt and knocks, as Swarajya explains. A firm that does this work for other companies is an OSAT, short for outsourced semiconductor assembly and test. Pillar 4 of Semicon 2.0 is meant to bring more of the advanced packaging technology to India. The Cabinet release says the world is now looking at India as a place for such units.
The 12 component approvals
The Electronics Components Manufacturing Scheme (ECMS) is a separate scheme from the chip mission, run by MeitY and aimed at the parts that go inside electronics. PIB’s factsheet of 17 September says ECMS was notified on 8 April 2025 with an outlay of Rs 22,919 crore, which the Union Budget 2026 to 2027 raised to Rs 40,000 crore. In August 2026, the factsheet says, 106 projects were approved across 15 states, and production had started at 38 of the approved plants.
The new round, listed in PIB’s 6 November release, covers twelve products:
| Product | Company approved |
|---|---|
| Multi-layer printed circuit board | NeST ICELR Private Limited |
| Relays | TDConnex (Chennai) Private Limited |
| Heat sinks | Modern Automotives Limited |
| Specialty ceramics | Voltix Semicon Private Limited |
| Copper foil | Indo Asia Copper Limited |
| Anode material for lithium-ion cells | TACC Limited |
| Cathode active material | Vidyuta Materials Private Limited |
| Capacitor-grade polypropylene film | Enerfolie LLP |
| Camera rim | Surface Modification Technologies Pvt. Ltd. |
| Precision moulds and tooling | TDConnex (Chennai) Private Limited |
| Power and control systems for capital equipment | Rockwell Automation India Private Limited |
| Factory automation equipment and system integration | Wipro Pari Robotics Private Limited |
The projects are in Gujarat, Karnataka, Madhya Pradesh, Maharashtra, Punjab, Tamil Nadu and Uttar Pradesh. PIB gives the round’s expected production as Rs 39,045 crore and direct jobs as 7,127. For two projects, Swarajya and the Free Press Journal give the same figures: Indo Asia Copper’s copper foil plant in Gujarat, Rs 3,546 crore and the largest in the round, and TACC’s Rs 2,438 crore project in Madhya Pradesh.
Why foil and battery materials matter
PIB says copper foil is an important input for copper clad laminate, the layered sheet from which printed circuit boards are made, and for lithium-ion cells. This is the first time ECMS has approved copper foil, cathode active material or specialty ceramics. Vaishnaw pointed to growing capability in battery cells, copper foils, copper clad laminates and high-end circuit boards, according to PIB.
In a lithium-ion cell the two electrodes are the cathode and the anode, and lithium ions move between them as the cell charges and discharges. The US Department of Energy’s 2023 assessment says graphite is the usual anode material and lists lithium iron phosphate and nickel manganese cobalt oxide among the main cathode chemistries. PIB says the aim of the approvals is to deepen value addition and reduce import dependence. Its factsheet lists printed circuit boards, camera and display modules, connectors, capacitors, lithium-ion cells and rare-earth magnets among components that remain import-dependent. For battery chemicals the government has a separate programme, covered in the Cabinet’s lithium and nickel processing scheme of 4 November.
The scheme in numbers
With the 12 new projects, PIB reports 118 approvals covering 34 products in 16 states, up from 106 projects and 30 products in 15 states in August. Expected investment is Rs 77,051 crore, projected production Rs 5,73,146 crore and expected direct jobs 81,755. Swarajya and the Free Press Journal both note that committed investment is above the original target of Rs 59,350 crore. Vaishnaw said nearly half the approved units are micro, small and medium enterprises.
The investment, production and jobs figures are expected or projected, as PIB words them, and they are not output yet. The count of 38 plants already producing is the measured part, and it dates from August. In Semicon 1.0 the first fab is still scheduled for 2028.
As of 12 November 2026 the ISM home page shows the portal as live for pillars 2, 3 and 4 and states no closing date for applications.
Sources & further reading
- PIB: Union Minister Ashwini Vaishnaw launches Semicon 2.0 Web Application Portal and announces 12 approved applicants under ECMS (6 November 2026)
- PIB: Cabinet approves Semicon 2.0 (15 July 2026)
- PIB: Prime Minister inaugurates SEMICON India 2026 (17 September 2026)
- PIB factsheet: Electronics Components Manufacturing Scheme, Building India's Electronics Backbone (17 September 2026)
- India Semiconductor Mission: home page with the Semicon 2.0 portal notice, guidelines and gazette notification (read 12 November 2026)
- US Department of Energy: Technology Strategy Assessment, Lithium-ion batteries (July 2023)
- The Week (PTI): Govt opens Semicon 2.0 applications, clears 12 electronics component projects worth Rs 7,503 crore (6 November 2026)
- Outlook India: Ashwini Vaishnaw launches Semicon 2.0 portal, announces 12 more ECMS approvals (6 November 2026)
- Swarajya: India's electronics component manufacturing push gains momentum as Centre approves 12 new projects worth Rs 7,503 crore (7 November 2026)
- Free Press Journal: Centre approves 12 electronics manufacturing projects worth over Rs 7,500 crore under ECMS (6 November 2026)
- Energetica India: Govt launches Semicon 2.0 portal, announces 12 ECMS approvals (10 November 2026)
- DD India: Ashwini Vaishnaw launches Semicon 2.0 portal, announces 12 more ECMS approvals worth Rs 7,503 crore (6 November 2026)
- Deccan Chronicle: Centre notifies Semicon 2.0 with Rs 1.27 lakh crore outlay (31 August 2026)
- FoneArena: Government notifies 6 pillars of Semicon 2.0 (31 August 2026)
- Swarajya: Why OSAT and ATMP are important to a fledgling Indian semiconductor industry (4 October 2024)
Researched and written with the help of AI tools and edited for accuracy. Provided for general information and discussion only, not professional advice. See our editorial standards and disclaimer. Spotted an error? Tell us.
Enjoyed this? Get the next one.
One good read at a time, straight to your inbox. No spam, unsubscribe anytime.